Active Directory New Subnet

How to create a new Active Directory site?

Active Directory (AD) has sites, which you can use to group servers into containers that mirror your network’s physical topology. Sites also let you configure replication between domain controllers (DCs). In addition, you can map several TCP/IP subnets to sites so that new servers can automatically join the correct site depending on their IP address and so that clients can easily find the DC closest to them.\r\n\r\nWhen you create the first DC, AD creates the default site Default-First-Site-Name and assigns the DC to this site. Subsequent DCs also add to this site, although you can later move the DCs to other sites. You can rename the default site if you want.\r\n\r\nYou use the Microsoft Management Console (MMC) Active Directory Sites and Services Manager snap-in to create and administer sites. To create a new site, perform the following steps.\r\n

    \r\n

  1. Start the MMC Active Directory Sites and Services snap-in. (From the Start menu, select Programs, Administrative Tools, Active Directory Sites and Services Manager.)
  2. \r\n

  3. Right-click the Site branch, and select New, Site from the context menu.
  4. \r\n

  5. Enter a name for the site (e.g., NewYork). The name must be 63 characters or fewer and can’t contain spaces or periods. You must also select a site link (only one site link, DEFAULTIPSITELINK, exists by default). Alternatively, enter
  6. \r\n

    IP

    \r\n

  7. Click OK.
  8. \r\n

\r\nAfter you create the site, you can assign various IP subnets to the site as follows.\r\n

    \r\n

  1. Start the MMC Active Directory Sites and Services snap-in. (From the Start menu, select Programs, Administrative Tools, Active Directory Sites and Services Manager.)
  2. \r\n

  3. Expand the Sites branch.
  4. \r\n

  5. Right-click Subnets, and select New, Subnet, as shown in image below:
  6. \r\n

    Active Directory New Subnet
    Active Directory New Subnet
    \r\n

  7. In the past, you needed to enter the subnet name in the formnetwork/bits masked (e.g., for network 200.200.201.0 with subnet mask 255.255.255.0, you’d enter 200.200.201.0/24). However, this method proved too complicated. Now, you simply enter the address and mask, as the Screen shows.
  8. \r\n

    Active Directory New Subnet Screen2
    Active Directory New Subnet Screen 2
    \r\n

  9. Then, select the site to associate the subnet with.
  10. \r\n

  11. Click OK.
  12. \r\n

\r\nAfter you have a subnet linked to a site, you can assign multiple subnets to the site.\r\n\r\nDetermining the bits masked portion of the subnet name can be confusing. This value is the number of bits set in the subnet mask, which ranges from 22 to 32. The subnet mask consists of four sets of 8 bits. You can use the following Figure to convert the subnet mask to bits.\r\n\r\n

Active Directory New Subnet Mask
Active Directory New Subnet Mask
\r\n\r\nFor example, the subnet mask 255.255.255.0 is 11111111.11111111.11111111.00000000 in binary, which uses 8 + 8 + 8 bits (i.e., 24) to define the subnet mask. The subnet mask 255.255.252.0 is 11111111.11111111.11111100.00000000 in binary, which is 8 + 8 + 6, or 22.\r\n\r\nAfter you define multiple sites, new DCs that you use DCPROMO to create will automatically join the site that matches their IP address. If no site exists for a DC’s IP subnet, the DC will join the site that authorized the DC’s promotion.\r\n\r\nCredits: John Savill, WinITPro

One thought on “How to create a new Active Directory site?”

  1. Chromium 15.0.874.106 Chromium 15.0.874.106 Ubuntu 10.04 Ubuntu 10.04
    Mozilla/5.0 (X11; Linux i686) AppleWebKit/535.2 (KHTML, like Gecko) Ubuntu/10.04 Chromium/15.0.874.106 Chrome/15.0.874.106 Safari/535.2

    When I right click to add new site in active directory sites and services, I do not get the option NEW. Please could you help. I a logged onto the DC as a Domain Admin.

Comments are closed.